Chippers

C13 Brush Chipper

C13 Brush Chipper from Hansa ProductsModel C13 is a new model, replacing Model C9 - a long time good performer in the Hansa range.

The ideal machine for lifestyle block owners, small to medium sized horticultural businesses, orchards, nurseries, farms, hire centres, school grounds, parks, etc.

Read more: C13 Brush Chipper

C7 Brush Chipper

Brush Chipper C6 from Hansa ProductsIf you own a larger property of one to ten acres with lots of trees, flowers and vegetable garden, you will find the average type shredder on the market in the 2 to 5 HP range is simply not satisfactory for processing all your prunings, trimmings and clean up material into compost or mulch. They cannot cope with the volume of materials to be processed. They are too slow, the inlets are often too small so that the material has to be precut before you feed it into the machine, or they are too lightly built.

Read more: C7 Brush Chipper

C4 Brush Chipper

Hansa Chipper C4 Brush Chipper, domestic chipperIf you own a domestic property with trees, flowers or a vegetable garden, you will find the average small shredder on the market of similar size is not efficient for processing all your prunings and trimmings into compost or mulch. They cannot cope with the volume of materials to be processed. They are too slow, block up easily, the inlets are often too small so that the material has to be precut before you feed it into the machine, or they are too lightly built.

Features


  •     One in feed chute with large opening at a  convenient operating height
  •     Quality engine – Honda 4 stroke GX160
  •     Capacity of 40mm branch diameter
  •     Easy starting
  •     Discharge out the side directly back onto your garden or stockpile
  •     Solid housing construction of 3mm steel plate
  •     Easy access to cutting blade – remove four bolts and everything is accessible
  •     Easy to transport, well balanced on large solid rubber wheels
  •     Will handle flax, cabbage tree leaves and palm fronds without wrapping around the rotor shaft
  •     Quality hyperloc powder-coated finish
  •     12 month warranty
  •     New Zealand made for New Zealand conditions 

 

 

 

 

 

 

 

 

 

 
Specifications
      Weight (kg)     Height (mm)     Width (mm)     Length (mm)     Approx Capacity*
5HP (max) Honda engine     50     1050     500     900     40mm branches
*depending on the type and hardness of the wood

When you compare different makes of machines, be careful, as some manufacturers rate their capacity by the size of the opening, which is misleading. Through a 40mm opening you can practically feed only a 20mm branch. Our inlet openings are much larger than the maximum recommended branch diameter.

Copyright © 2017 Ian Day Farm & Lifestyle. All Rights Reserved. Designed by JoomlArt.com. Joomla! is Free Software released under the GNU General Public License.